Slurry seal
Sealing highway and footway surfaces, protecting them against the ingress of water and the detrimental effects of freeze thaw.
Rhino slurry sealing is a cold-mix, bitumen emulsion overlay for repairing and sealing highway and footway surfaces. A cost-effective method of restoring the surface finish with texture and sealing which will slow down deterioration and thereby extend the service life of the surface.
A quick and easy solution for many road and footway maintenance problems. Rhino slurry uses a blend of aggregate, bitumen emulsions and latex to provide a slurry seal for:
Hand mix, hand lay: suitable for awkward to get to places.
Combine with our range of patching and crack repair products to reprofile the surface prior to application of the slurry
Can be opened to traffic, vehicular or foot, in as little as 1 hour.
Slurry seal can be laid using 3mm aggregate typically for treating footways and 6mm for carriageways
Benefits
- Prevent water penetration
- Restores the surface texture
- Reprofiles the surface
- Restore the colour of the asphalt surface
- Only quantities required are mixed so no materials are left unused
- Can be laid throughout most of the year
- Ironwork rarely needs adjusting
Why the need to use slurry
In asphalt surfaces the bitumen binder becomes oxidised over time causing erosion of the bitumen/filler/aggregate matrix. Slurry surfacing can be applied to ageing asphalt to seal the top surface, stopping the oxidisation process.
Preparation
The surface to be treated must be free from all dust and loose material and should be cleaned thoroughly with a mechanical broom and/or suction sweeper, supplemented if necessary by hand sweeping. Open cracks must be cleared of vegetation and other loose material. All debris and loose material arising must be removed. Rhino can provide preparation if required.
Slurry is applied in a fluid state and needs no compaction or heavy machinery to provide a long lasting, low cost repair to roads, paths, tracks and footways.
The use of high-performance cold bitumen emulsions binder technology and a specially designed compact mobile mixing machine, results in a surface which has a durable and high-performance finish.
Benefits of using hand application to apply Slurry
- Mixed in a purpose-built pedestrian mixer
- Large volume capability
- Green: only mix materials needs for the job
- Tight access areas are not a problem
- Handwork around ironwork and street furniture easily accommodated
- Pre-patching applied by hand for a uniform finish
Have Questions?
- How do I get an estimate for my work?
- Can I get a technical sales representative to visit me?
- What are the locations of your teams?
- Who are Rhino Asphalt Solutions Ltd?
- Where do you carry out your work?
- Why would I choose Rhino to carry out my work?
How do I get an estimate for my work?
Here’s the ways you can get a quotation from us:
- Email our estimating team on estimating@rhino-uk.com
- Fill out our contact us form
- Telephone our office on 01273 402 900
- Contact our technical sales representative on:
- Greg Jarvis – Sales South 07810 329 609
- Tony Wooldridge – Head of UK Sales 07823 334 072
- Steve Reed – Regional Manager North 07827 445 787
- Nathan Davenhill – Sales North 07810 329 700
- Send us an enquiry on info@rhino-uk.com
Can I get a technical sales representative to visit me?
Our technical sales representatives are available for site inspections, sales calls and presentations.
To arrange one please contact us as follows:
- By email on info@rhino-uk.com
- By telephone to the office on 01273 402 900
- By contacting them directly on
- Greg Jarvis – Sales South 07810 329 609
- Tony Wooldridge – Head of UK Sales 07823 334 072
- Steve Reed – Regional Manager North 07827 445 787
- Nathan Davenhill – Sales North 07810 329 700
What are the locations of your teams?
We have sales teams based in Scotland, North of England and South of England
We operate across the whole of the UK with our teams who are based in Kent, Sussex and Cheshire. From these locations our operatives cover the whole of the UK.
Who are Rhino Asphalt Solutions Ltd?
Rhino is a private limited company formed in 2000 and has been under its present ownership since 2005. The owners and management have been working in the field of specialist highway maintenance repairs since the early 90’s and bring this expertise and experience to every job that we carry out.
Where do you carry out your work?
Principally we work on the UK highway (road & bridge) network which includes Motorways and Trunk Roads, Local Authority Highways including County Councils, Borough Councils, Metropolitan Authorities and London Boroughs.
We also occasionally work on private residential roads, airfields (both landside and airside), depots and yards.
Why would I choose Rhino to carry out my work?
Here’s our customer promise which should answer that question for you.
Our senior management team has over 100 combined years' experience of the highways and structures repair and maintenance market, so we know the industry’s ‘best’, as well as its ‘worst’ practices. When we set up Rhino, we were adamant that we would build a business based on:
• Authorised and approved systems and materials for repairing and reinstating highway defects.
• Excellent customer service.
• Providing a highly responsive service.
• Being flexible to meet customers’ specific requirements.
Therefore, when you deal with Rhino, you are guaranteed that there are no hidden extras. The price we quote includes:
• All materials, labour and plant necessary to complete the work.
• A site inspection - to assess the work prior to quotation.
• A clear, unambiguous, firm quotation which we honour.
• A programme which specifies timescales required to complete the works - and we keep to it.
Our pledge to you is that we will always provide you with a highly responsive and flexible service, use the best material for the job and never over promise and under deliver.
Contact us
Give us a call
01273 402 900
Complete the form to email us, found on the contact us page
.